脂肪率计
基本信息
作者: 从来斌
学生学号:
班级:
学校:
指导老师:
写作日期:
字数: 13,439
编号: 7
类别: 医科〉医学技术
级别: 本科毕业论文
摘 要
科学技术的进步,经济的繁荣,人民生活生活水平的日益提高。但是由于吃得好了,吃得多了,运动的少了,肥胖已经成为了一种现象。肥胖所带了的诸多不利和疾病已经被人们逐渐被人所认识。人们对肥胖的广泛密切关注,对人体脂肪含量的测量技术提出了挑战。研制一种轻便、快捷、可靠性高、重复性好.、易操作、价格低的人体脂肪含量的测量仪器无疑深受人们的欢迎。
本文通过对国内外相关资料的调研,研究分析了当前的所广泛采用的人体脂肪含量的分析方法,给出了一种人体脂肪百分含量检测系统的原理和构成。并通过实验对系统进行考核和验证。
通过实验表明,系统可以对人体脂肪的百分含量进行测量,与现行的人体阻抗法的测量结果具有较好的一致性。两种方法测量的数据的线性相关系数为 (不排除由于手头样本太少,实验不全面的可能性)。仪器优越的特性,低廉的价格,都预示着它广阔的应用前景,良好的社会效益和经济效益。
关键词:
人体脂肪百分含量 近红外光技术 相关系数
Abstract
With the advancement of science and technique, prosperity of economy, the standard
of living has been improved dramatically day by day. Obesity has become a prevalent
phenomenon because of eating too much and exercise too little. Now more and
more people have realized that obesity will cause discomfort and some diseases.
Obesity has abstracted worldwide attention, it make a challenge to the technique
of determining percent fat in a body. It will be welcome by public to design
a fast, believable, repeatable, easy-operating, inexpensive instrument.
A variety of measuring techniques, which are widely used, is researched and
analyzed in this paper. This paper describes the measuring principle and structure
of a kind of photoelectric measuring system for determining percent fat in a
body. And many experiments are carried to verify the system.
The experiments show that this apparatus can determine percent fat in a body,
and the data is consistent with that measured by using the bioimpedance technique,
and the linear correlation coefficient is 0.84. With the superiority and inexpensiveness
of the apparatus, its good application perspective is expected.
Keywords:
Percent fat in a body Infra-red technique Linear correlation coefficient
目 录
第一章 绪论
1.1 概述………………………………………………………………………1
1.2 当前现行的测量技术和国内研究概况…………………………………1
1.3 论文研究的主要内容及重要意义………………………………………3
第二章 激光和生物组织的相互作用原理
2.1 光和物质…………………………………………………………………5
2.1.1 吸收………………………………………………………………5
2.1.2 散射………………………………………………………………6
2.2 蒙特卡罗(Monte Carlo)定律…………………………………………7
2.3 人体脂肪、肌肉的光学特性分析………………………………………9
2.4 人体吸收光谱……………………………………………………………9
第三章 测量系统的构成
3.1 概述……………………………………………………………………11
3.2 测量系统的基本工作原理……………………………………………11
3.3 测量系统的总体设计…………………………………………………15
3.4 信号处理方案的确定…………………………………………………16
第四章 光学测量头的设计
4.1 概述……………………………………………………………………17
4.2 测头结构设计…………………………………………………………17
第五章 测量系统硬件设计
5.1 概述……………………………………………………………………25
5.2 信号处理系统…………………………………………………………26
5.2.1 单电源反相放大电路…………………………………………26
5.2.2 实际电路设计…………………………………………………27
第六章 测量系统的试验和数据处理
6.1 概述……………………………………………………………………30
6.2 测量系统的性能测试…………………………………………………30
结束语………………………………………………………………………………37
参考文献…………………………………………………………………………38
致谢…………………………………………………………………………………40
|